A wheeled excavator earns its place when the work is roadside, urban, or farmland — where the machine travels a lot between cut sections, the ground can carry rubber-tyred travel, and machine utilisation matters more than raw underfoot flotation. The HWL80 is our 8-ton wheel excavator built for exactly that mix of jobs. This guide covers its real specification, the Indonesian work scenarios where it pays off, how to decide between wheeled and crawler, and what to check before you buy.
What the HWL80 Is
The HWL80 is an 8-ton class wheel excavator with a 4×2 wheel drive and a road travel speed of 30 km/h. That combination is the whole point of the machine: it digs like an excavator and moves between sites like a loader. For contractors running road packages, municipal works, and estate maintenance across Sumatra and Kalimantan, one machine that can finish a drainage cut in the morning and reach the next site before lunch removes a transport step from the job.
HWL80 Key Specifications
These are the published figures for the HWL80. Anything a job site needs beyond this table is confirmed against your machine on request — we do not publish a number we cannot stand behind.
| Parameter | Value |
|---|---|
| Operating Weight | 8,000 kg |
| Engine Power | 55 kW (74 HP) |
| Bucket Capacity | 0.3 – 0.4 m³ |
| Max Digging Depth | 4,000 mm |
| Travel Speed | 30 km/h |
| Wheel Drive | 4×2 Wheel Drive |
Maximum digging depth of 4,000 mm covers trenching, drainage, and canal work at depth without changing the front linkage. Bucket capacity of 0.3 – 0.4 m³ is sized for the 8-ton class — productive for earthmoving, light enough to keep the machine stable on rubber.
Where a Wheeled Excavator Wins in Indonesia
- Road construction — roadside digging, drainage works, and curb installation along roads that already support the machine’s weight.
- Building sites — compact enough for tight urban spaces, powerful enough for heavy foundation work.
- Agriculture — trenching, irrigation canals, and land leveling on farms and plantation blocks.
- Estate and municipal maintenance — long service lines where the machine returns to the same stretch of work every week.
Wheeled vs Crawler — Three Questions Before You Decide
Every wheeled machine has a counterpart with tracks, and both are excavators. The decision comes down to three answers, not to brand preference:
- Does the machine travel between cut sections? A wheeled excavator covers ground quickly on rubber; if a shift means moving several times, travel speed of 30 km/h saves hours.
- Is the ground firm enough for rubber? Wheeled travel needs a carrying surface. Rice-field soft ground, deep mud, and fresh fill favour tracks.
- Is the job one site or many? One long-term site with rough ground favours a crawler. Work spread across roads, villages, and estate blocks favours a wheeled machine.
How to Size the HWL80 for Your Job
Four factors decide whether the 8-ton wheel excavator is the right class for you:
- Match the machine class to the work. The HWL80 sits between mini and 20-ton machines. Land-clearing and plantation prep with a carrier that also has to leave the site quickly fits the 8-ton class; bulk earthmoving in a quarry usually does not.
- Match the bucket to the material. 0.3 – 0.4 m³ is the published bucket range. Softer material and long pushes take the upper end; compacted or sticky material takes the lower end with a toothed bucket.
- Check the depth you must reach. With 4,000 mm maximum digging depth, drainage and canal work up to that depth is in scope — deeper Than that and the front configuration needs review.
- Plan the attachments. A wheel excavator takes the same quick-hitch attachment family as a crawler of the same class — bucket, breaker, auger, grapple. Tell us the dominant job and we confirm the matched set.
Transport, Delivery and Spare Parts
Wheeled excavators load onto a flatbed without a track-under-crawler transfer, which shortens the loading window on project sites. We keep wear parts and service items in stock in Jakarta, so a broken pin, bucket tooth, or hydraulic seal does not hold a road package for weeks. Machines are inspected before delivery, and a repeat customer in Indonesia has now taken HWL80 units into a fleet of nine machines — five of them HWL80s — because the machine kept running on road and farm work.
Full Spec Sheet Available on Request
The table above is the published specification. If you need axle load, tyre size, turning radius, lifting capacity, or an exact configuration for a named application, we confirm those figures against the machine you are buying. Full spec sheet available on request — no estimate stands in for a measured number.
Support and Ordering
Message us on WhatsApp with your job type and the working conditions, and we confirm whether the HWL80 is the right class before you commit: https://wa.me/8618253786026. We confirm compatibility, send the full spec sheet, and quote matched attachments with delivery from Jakarta stock.
FAQ 1 — What machine class is the HWL80?
FAQ 2 — What are the published HWL80 specifications?
FAQ 3 — When should I choose a wheeled excavator over a crawler in Indonesia?
FAQ 4 — Is a 4,000 mm digging depth enough for drainage work?
FAQ 5 — What does a 30 km/h travel speed actually save?
FAQ 6 — Can the HWL80 be used on farms and plantations?
FAQ 7 — How are delivery and spare parts handled in Indonesia?
FAQ 8 — What should I send before asking for a quotation?
Frequently Asked Questions
What machine class is the HWL80?
The HWL80 is an 8-ton class wheel excavator with 4x2 wheel drive, a 55 kW (74 HP) engine and a 30 km/h road travel speed. It sits between a mini excavator and a 20-ton crawler excavator.
What are the published HWL80 specifications?
Operating weight 8,000 kg, engine power 55 kW (74 HP), bucket capacity 0.3 - 0.4 m3, maximum digging depth 4,000 mm, travel speed 30 km/h, and 4x2 wheel drive. Any further figure is confirmed against the machine on request.
When should I choose a wheeled excavator over a crawler in Indonesia?
Choose wheeled when the machine moves between sites several times a day, the ground is firm enough for rubber-tyred travel, and the work is spread across road works, buildings and farm blocks. Choose a crawler when the job is one long-term site with soft or muddy ground.
Is a 4,000 mm digging depth enough for drainage work?
4,000 mm covers trenching, drainage and irrigation canal work up to that depth. Deeper cuts need the front configuration reviewed before purchase - we confirm the linkage against the depth you must reach.
What does a 30 km/h travel speed actually save?
It saves the transloading step. The machine drives itself to the next cut section or the next site at up to 30 km/h instead of waiting for a low-loader on every move, which raises daily machine utilisation on work spread over a wide area.
Can the HWL80 be used on farms and plantations?
Yes. Published applications include trenching, irrigation canals and land leveling on farms, plus land preparation around oil-palm and plantation blocks. Rubber-tyred travel suits the firm service roads of an estate.
How are delivery and spare parts handled in Indonesia?
Machines are inspected before delivery, and wear parts and service items are stocked in Jakarta, so pins, teeth and hydraulic seals are replaced locally instead of waiting on an import order. A repeat customer has taken HWL80 units into a nine-machine fleet, five of them HWL80s.
What should I send before asking for a quotation?
Send your dominant job, the ground condition, the depth and width you must reach, and your excavator class if you already run one. We confirm whether the 8-ton wheeled HWL80 fits, send the full spec sheet, and quote a matched attachment set with delivery from Jakarta stock.